Consistent inspection rounds
Each round checks the same points the same way, so changes over time stand out.
Inspection and patrol robotics
Robotx supplies and supports quadruped robots for inspection and patrol at substations, industrial plants and tunnels in Australia and New Zealand, gathering consistent data from hazardous areas.
What it changes for your operation
Legged robots that run scheduled inspection and patrol rounds with thermal, visual and acoustic sensors.
Less time in hazardous areas
Routine rounds in hot, noisy, confined or energised areas mean people enter them less often.
Earlier signs of faults
Thermal, visual and acoustic data can flag hot spots, leaks and abnormal sounds before issues grow.
Extra eyes for security teams
A patrol robot covers set routes after hours and reports anything unusual to the control room.
In operation
Typical capabilities
- Legged mobility over stairs, kerbs, gratings and uneven ground
- Scheduled autonomous routes with defined checkpoints
- Thermal, high-resolution camera and acoustic sensing payloads
- Gauge and meter reading on some platforms
- Live video and manual operator control when needed
- Weather and dust resistance for outdoor sites
Where we deploy it
Brands we supply for this
More detailInspection & Patrol: how it works and how we deploy itWhere it works best, choosing the right platform, deployment steps and further reading
Where legged robots fit in inspection and patrol
Many sites rely on people walking the same rounds every day or night: reading gauges, checking for leaks and hot spots, listening for unusual noise, and confirming that doors and fences are secure. These rounds are important, but they are repetitive, and some take people into areas that are hot, noisy, confined or close to energised equipment.
Quadruped robots can take on the routine part of that work. Because they walk rather than roll, they can climb stairs, cross gratings and handle the mixed surfaces found in substations, plant rooms, tunnels and industrial sites. Fitted with thermal, visual and acoustic sensors, they collect the same data at the same points on every round, which makes trends easier to see.
The robot does not replace qualified inspectors, maintenance staff or security officers. It collects information and flags anything unusual, and your people decide what to do about it.
What we assess before recommending a platform
During the site assessment we walk the proposed routes and look at terrain, stairs, doorways, lighting and weather exposure. We also check wireless network coverage along the route, where the robot will charge, and how its data will reach your team. For energy and utility sites, we consider access rules, exclusion zones and your existing safety procedures.
We also discuss what you want to measure. The choice of payload, whether thermal imaging, zoom cameras, acoustic sensors or gas detection where the platform supports it, depends on the faults you are trying to catch.
Deployment and ongoing support
After you approve the proposal, Robotx sets up the robot, maps the site, configures routes and checkpoints, and trains your operators. Your operators run the missions and review the data. Robotx supports the equipment after handover with servicing, parts and warranty administration, and can adjust routes and checkpoints as your needs change.
Inspection & Patrol: common questions
Have a question about your site? Talk to a specialist.
What can a quadruped robot inspect?
A quadruped robot can carry cameras, thermal imagers and acoustic sensors along a set route to check equipment such as switchgear, transformers, pumps, pipework, cable tunnels and conveyors. It can capture images of gauges, detect hot spots and record unusual sounds. The data goes to your qualified people for review, and they remain responsible for the inspection.
Why use a legged robot instead of a wheeled one?
Legs let a robot climb stairs, step over cables and kerbs, and cross gratings, gravel and uneven ground that stop most wheeled robots, which is useful in plants, substations and older buildings with mixed surfaces. On flat, open sites a wheeled platform may be simpler, and we will say so during the assessment.
Can inspection robots work outdoors in Australian conditions?
Many industrial quadrupeds are built for outdoor use with ingress protection against dust and water, but heat, heavy rain, mud and steep terrain all affect performance and battery life. We look at your site's conditions, including summer temperatures and exposure, during the assessment and recommend a platform and operating plan to suit.
Do patrol robots replace security guards?
No. A patrol robot can cover set routes and report what it sees, but it cannot respond to an incident, exercise judgement or deal with people. It works best as an extra set of eyes that lets your security team focus on response. Robotx does not supply weaponised or restricted equipment.
How do we get started with robotic inspection?
Start with a consultation about the rounds you do today, the equipment you check and what you want to measure. We then assess the site, including routes, access, stairs, network coverage and charging locations. You receive a written proposal covering the platform, sensors, deployment plan, training and support. Pricing is set out in that proposal.
Tell us where your operation loses time.
A Robotx consultation starts with your sites, tasks and constraints. We’ll tell you where robotics fits and where it doesn’t, and what a sensible first deployment would look like.